JoyStick Shield -Arduino Compatible

Description :

The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five momentary push buttons (4+ joystick select button) and a two-axis thumb joystick gives your Arduino functionality on the level of old Nintendo controllers.

The momentary push buttons are connected to Arduino digital pins 2-6; when pressed they will pull the pin low (utilizing the internal pull-ups of the Arduino). Vertical movement of the joystick will produce a proportional analog voltage on analog pin 0, likewise, horizontal movement of the joystick can be tracked on analog pin 1.

Features :

1、Compatible Leaf maple、Arduino Deumlanove/UNO、Arduino MEGA、FEZ Panda II、Freeduino （No additonal arduino shield or wires required）

2、2 axis thumb joystick with push on joystick button（analog pin 0 controls vertical movement & analog pin 1 controls horizontal movement）

3、Joystick button and four 12mm momentary push button connect to digital pin 2-6（digital pin 2-6 will pull low when pressed the button）

4、Built-in RESET button

5、Operation Level: Digital 3.3V or Digital 5V

6、Size: 70mm x 54mm

 

Pin Defination :


 

Click to download the Schematic Diagram and manual